Particle filter cleaning agent, K2, 5 l, Black

K2 DPF CLEANER is a professional agent for regenerating clogged DPF/FAP particulate filters in diesel engines. Dissolves and removes carbon deposits and ash accumulated inside the filter without being dismantled.

The use is fast, easy and efficient.

The agent eliminates the formation of defects caused by the inadequate condition of the DPF filter (for example, power drops, increased fuel consumption). After application, it evaporates completely, leaving no traces.

HOW TO USE:

1. Let the engine cool down before use (the temperature must be lower than 50C).
2. Remove the pressure or temperature sensor.
3. Shake the container. Insert the application tube through the resulting hole.
4. Empty the entire dose for 1 filter. After every 3-5 sprays, keep a pause of 5 seconds to penetrate well into the surface of the filter.
5. Install a pressure or temperature sensor.
6. Start the engine and let it idle for at least 15 minutes to allow the fluid to evaporate.
7. Take a 30-minute trip, preferably in the countryside, with the engine speed at the level of 2500-3000 rpm. This can lead to the release of residual water vapor from the exhaust system.