K2 Polonia
Spray for inflating and repairing tires TIRE DOKTOR K2 400ml
Spray for inflating and repairing tires TIRE DOKTOR K2 400ml
Couldn't load pickup availability
Wheel inflation spray Tire Doktor B310 K2.
Manufacturer K2 Poland.
The spray for repairing and inflating tires is intended to seal the elastic wall of enclosures where there is air under pressure, in case of accidental puncture with perforating objects, without the need to dismantle it. It is designed to be effective regardless of the climate, maintaining the optimal performance of the product in the extreme thermal operating regime of the tire.
It does not influence the balance of the wheels but remains active in the tire, interfering with other holes that may appear later.
Not to be used to repair large holes.
Use:
1. Remove the object that caused the pin, if this is possible.
2. Place the tire in a vertical position.
3. Screw the end of the pipe into the tire valve. Keep the bottle in a vertical position, lift the cap and press. In a minute the tire will be sealed and inflated. Use the entire contents of the bottle.
4. Disconnect the pipe.
5. Start the car immediately after this procedure and drive for approximately 5km without exceeding 35km/h.
6. The resealing product will spread throughout the tire. Check the tire pressure again.
CAREFUL!!
Content is under pressure. Protected from exposure to the sun and temperatures higher than 50C. Do not throw the container into fire or forcefully open it, even when it is empty. Do not use the product on flammable objects. Do not use the product in spaces without ventilation, it may form explosive vapors. Do not leave the container out of the reach of children. Do not inhale aerosols. Do not store it near heat sources.
Spray 400ml.
Wheel inflation spray Tire Doktor B310 K2.
Manufacturer K2 Poland.
The spray for repairing and inflating tires is intended to seal the elastic wall of enclosures where there is air under pressure, in case of accidental puncture with perforating objects, without the need to dismantle it. It is designed to be effective regardless of the climate, maintaining the optimal performance of the product in the extreme thermal operating regime of the tire.
It does not influence the balance of the wheels but remains active in the tire, interfering with other holes that may appear later.
Not to be used to repair large holes.
Use:
1. Remove the object that caused the pin, if this is possible.
2. Place the tire in a vertical position.
3. Screw the end of the pipe into the tire valve. Keep the bottle in a vertical position, lift the cap and press. In a minute the tire will be sealed and inflated. Use the entire contents of the bottle.
4. Disconnect the pipe.
5. Start the car immediately after this procedure and drive for approximately 5km without exceeding 35km/h.
6. The resealing product will spread throughout the tire. Check the tire pressure again.
CAREFUL!!
Content is under pressure. Protected from exposure to the sun and temperatures higher than 50C. Do not throw the container into fire or forcefully open it, even when it is empty. Do not use the product on flammable objects. Do not use the product in spaces without ventilation, it may form explosive vapors. Do not leave the container within the reach of children. Do not inhale aerosols. Do not store it near heat sources.
Spray 400ml.
Wheel inflation spray Tire Doktor B310 K2.
Manufacturer K2 Poland.
The spray for repairing and inflating tires is intended to seal the elastic wall of enclosures where there is air under pressure, in case of accidental puncture with perforating objects, without the need to dismantle it. It is designed to be effective regardless of the climate, maintaining the optimal performance of the product in the extreme thermal operating regime of the tire.
It does not influence the balance of the wheels but remains active in the tire, interfering with other holes that may appear later.
Not to be used to repair large holes.
Use:
1. Remove the object that caused the pin, if this is possible.
2. Place the tire in a vertical position.
3. Screw the end of the pipe into the tire valve. Keep the bottle in a vertical position, lift the cap and press. In a minute the tire will be sealed and inflated. Use the entire contents of the bottle.
4. Disconnect the pipe.
5. Start the car immediately after this procedure and drive for approximately 5km without exceeding 35km/h.
6. The resealing product will spread throughout the tire. Check the tire pressure again.
CAREFUL!!
Content is under pressure. Protected from exposure to the sun and temperatures higher than 50C. Do not throw the container into fire or forcefully open it, even when it is empty. Do not use the product on flammable objects. Do not use the product in spaces without ventilation, it may form explosive vapors. Do not leave the container out of the reach of children. Do not inhale aerosols. Do not store it near heat sources.
Spray 400ml.
Shari
